video interfaces

DVI Port: Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). (Memory based on flip-flops is known as static random-access memory (SRAM). Such digital integrated circuits are ubiquitous in modern electronic devices, such as calculators, mobile phone handsets, and computers. In fact, many digital circuits are actually implemented as variations of analog circuits similar to this example—after all, all aspects of the real physical world are essentially analog, so digital effects are only realized by constraining analog behavior. However, this is something generally unattainable by the definition comprising its scarcity among every technology available. As digital circuits become more complex, issues of time delay, logic races, power dissipation, non-ideal switching, on-chip and inter-chip loading, and leakage currents, become limitations to the density, speed and performance. An example is the comparator which takes in a continuous range of voltage but only outputs one of two levels as in a digital circuit. Thomas J. Research oriented institutions such as ARPA/DARPA, European Space Agency, Ministry of International Trade and Industry, Mitre Corporation, NASA, NSF, CERN, and universities with high research activity such as MIT and Stanford might be considered high-tech microsocieties in relation to the general surrounding socio-economic region or overall activity sector. In fact, many digital circuits are actually implemented as variations of analog circuits similar to this example—after all, all aspects of the real physical world are essentially analog, so digital effects are only realized by constraining analog behavior.

VGA Port:A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. Until 1950 this field was called "radio technology" because its principal application was the design and theory of radio transmitters, receivers, and vacuum tubes. An electronic component is any physical entity in an electronic system used to affect the electrons or their associated fields in a manner consistent with the intended function of the electronic system. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right. Components are generally intended to be connected together, usually by being soldered to a printed circuit board (PCB), to create an electronic circuit with a particular function (for example an amplifier, radio receiver, or oscillator). Analog electronic circuits are those in which current or voltage may vary continuously with time to correspond to the information being represented. Wires are treated as transmission lines, with (hopefully) constant characteristic impedance, and the impedances at the start and end determine transmitted and reflected waves on the line. Research oriented institutions such as ARPA/DARPA, European Space Agency, Ministry of International Trade and Industry, Mitre Corporation, NASA, NSF, CERN, and universities with high research activity such as MIT and Stanford might be considered high-tech microsocieties in relation to the general surrounding socio-economic region or overall activity sector.

HDMI Port: If your PC...

Read More

what’s Your Primary Usage

The term high definition once described a series of television systems originating from August 1936; however, these systems were only high definition when compared to earlier systems that were based on mechanical systems with as few as 30 lines of resolution. These leads connect to create an electronic circuit with a particular function (for example an amplifier, radio receiver, or oscillator). The combination of components and wires allows various simple and complex operations to be performed: signals can be amplified, computations can be performed, and data can be moved from one place to another.[1] Circuits can be constructed of discrete components connected by individual pieces of wire, but today it is much more common to create interconnections by photolithographic techniques on a laminated substrate (a printed circuit board or PCB) and solder the components to these interconnections to create a finished circuit. In a series circuit, the same current passes through a series of components. The ability of electronic devices to act as switches makes digital information processing possible. In an integrated circuit or IC, the components and interconnections are formed on the same substrate, typically a semiconductor such as silicon or (less commonly) gallium arsenide. Such considerations typically become important for circuit boards at frequencies above a GHz; integrated circuits are smaller and can be treated as lumped elements for frequencies less than 10 10GHz or so. Electronics deals with electrical circuits that involve active electrical components such as vacuum tubes, transistors, diodes and integrated circuits, and associated passive electrical components and interconnection technologies.

Read More

high-definition television

The term high definition once described a series of television systems originating from August 1936; however, these systems were only high definition when compared to earlier systems that were based on mechanical systems with as few as 30 lines of resolution. Because the high-tech sector of the economy develops or uses the most advanced technology known, it is often seen as having the most potential for future growth. Like Big Science, high technology is an international phenomenon, spanning continents, epitomized by the worldwide communication of the Internet. Wires are usually treated as ideal zero-voltage interconnections; any resistance or reactance is captured by explicitly adding a parasitic element, such as a discrete resistor or inductor. Wires are usually treated as ideal zero-voltage interconnections; any resistance or reactance is captured by explicitly adding a parasitic element, such as a discrete resistor or inductor. Thus a multinational corporation might work on a project 24 hours a day, with teams waking and working with the advance of the sun across the globe; such projects might be in software development or in the development of an integrated circuit. Digital circuitry is used to create general purpose computing chips, such as microprocessors, and custom-designed logic circuits, known as application-specific integrated circuit (ASICs). ...

Read More

difference between a HDTV and a monitor

Tuners aside there is still a distinct difference, between a computer display and a HDTV. When the PC just got started (or an Apple) you could use a TV as a monitor, but they quickly learned that interlaced tubes are terrible for reading text, so progressive scan displays became the norm, so along came VGA which has the same resolution as an SDTV; 640×480, but progressive. This obviously wasn’t enough and NEC released the first multiscan display that supported multiple resolutions. (I am drastically simplifying this time line) Next came flat panel displays that were fixed pixels so they used scallers to emulate the multiscan functionality (this is why LCD monitors almost never look great unless they are set to their native resolution)...

Read More